Competitive pressure, increased customer requirements, more complex products and processes: For these reasons, more and more companies are opting to use industrial CT scanning technology. In many industries, CT scanners can save considerable costs, reduce labor hours and increase product quality.
An industrial CT system consists of the CT scanner and software for analysis and visualization. The software is the "brain" of the system and gives you access to extremely powerful applications in areas such as quality control, optimization of processes and tools, and automation.
Here we show you what you can actually achieve in your production with industrial CT scanners and the right software, give you practical examples and explain how they work.
Questions about the use, costs and capabilities of industrial CT for your application? We will be happy to answer. Just send us an e-mail:
Whether engine blocks or welding spots, products manufactured by injection molding or metal casting processes or results of 3D printing processes: Quality control ultimately determines the quality of the product and compliance with ever tighter defect tolerances. In addition, as technology continues to evolve, products are becoming more complex and smaller in size, increasing the need for precision. Manufacturers and their customers must also constantly optimize their processes in order to remain competitive and position themselves in the market.
A wide range of testing systems are used today for quality control, inspection and analysis, such as optical and laser-based inspection systems. Some non-destructive testing methods (e.g. eddy current and magnetic particle inspection) can detect superficial material defects. However, these systems often cannot "see" all the properties of a part and thus cannot provide data on defects and deviations. Destructive testing by cross-sectional inspection of a part is both costly and limited.
This is where industrial computed tomography (abbreviated industrial CT) comes in. A CT scanner also penetrates the interior of parts and has no problems even with transparent or reflective surfaces. The data thus generated is then processed using special software, which enables numerous applications, such as:
Parts scanned by CT can be "unrolled" on a computer and then inspected for defects even on the inside.
CT scanning, also known as 3D-computed tomography, works by processing multiple X-ray images to gain a dimensionally accurate 3D model of the object being scanned.
The wavelengths used with industrial CT scanning are both shorter and more energetic than those used to X-ray a broken bone, which means they can easily penetrate dense materials such as wood, plastic, composites, and metal. And where X-ray machines take a one-sided image of the target without depth resolution, industrial CT scanners view all sides of an object and use mathematical methods to reconstruct a volume. This resulting 3D volume offers an interior view that no other technology provides.
But CT scans alone are not enough. Only the combination with the right software tools for analysis and visualization gives you a system that can be used extremely productively in various industry applications. Software such as Volume Graphics' special solutions offers functions that go far beyond the capabilities of the native functionality of your CT scanner, such as:
These are just some of the software functions available for the analysis of CT data. They enable the significant improvement of quality control, the acceleration of processes and ultimately the production of finished parts of the highest quality while maintaining high cost efficiency.
The process starts by placing the workpiece on a rotating turntable, an X-ray source sitting on one side, a digital detector panel on the other. Larger objects might be scanned by simultaneously rotating the X-ray source and detector, not unlike the CT scanner used by medical facilities.
Whatever the approach, the X-ray device is then energized with anywhere between 40 kilovolts to six megavolts or more. As the object rotates, it weakens X-ray radiation in proportion to its density. The X-rays that aren’t absorbed or scattered pass through to the detector panel, which continuously captures the resulting image. Based on the type of machine, the beam shape, and the size of the workpiece, the turntable (or beam) can also be "translated" (moved vertically) to capture the entire part geometry.
The beam itself might be shaped like a pencil, a cone, or a flattened fan, each of which has a direct effect on the speed and quality of the resulting image. Other factors play a role as well, including the target material, the part thickness, production requirements, desired precision, and image resolution.
Perhaps most relevant of these is the material. It might seem obvious that the denser it is, the greater the amount of power needed to penetrate it. While higher power usually correlates to improved image contrast due to less noise, higher voltage leads to less noise as well, but may reduce the contrast in some cases if no countermeasure is taken. It's not possible to simply crank up the volume, so to speak, on very large or very dense parts. It's for this reason that CT scanning is usually limited to suitcase-sized and smaller parts, although there are exceptions.
Key to the CT scan and the critical data analysis that follows is the voxel. When an X-ray beam’s high-energy photons pass through their target, some are absorbed and others scattered, but the remainder strike the detector screen opposite the X-ray source. They then energize the (two dimensional) pixels there in proportion to the density of the material being scanned as well as its thickness and attenuation values, and generate a series of grayscale images.
This is where the computational part of the process comes in. CT-data visualization software reconstructs those millions of pixels into three-dimensional voxels. Then, employing advanced mathematical algorithms, the software creates a full three-dimensional visualization of the exact object that’s been scanned. Next, a rainbow of tools can be employed to analyze the material density, stress patterns, internal defects, design flaws and a host of other attributes of what’s been scanned— which includes machined metal parts, 3D-printed prototypes, plastic injection-molded parts, fiber-reinforced plastics, or anything else that’s scannable.
These software-based analyses and visualizations can be highly valuable to manufacturers in almost any industry, allowing designers and engineers to understand failure modes, validate critical part features, predict how products will perform, and both quantify and qualify manufacturing processes.
The CT scanning, analysis and visualization process is fast, reliable, contactless and non-destructive. This enables insights in inspection and metrology that go far beyond conventional optical or tactile metrology. This method can be used at any stage of production, from prototyping to inline inspection in manufacturing.
Examples of the many applications of Industrial CT Scanning:
Hundreds of such applications exist, running the gamut from car-key fobs to industrial robots to rotor blades to carbon-fiber racing bikes. In each example, after scanning is done, CT-integrated software helps manufacturers analyze, visualize, measure, and document workpieces inside and out. The result is continuous product improvement, reduced engineering time and costs, and fewer failures in the field. You'll find an overview of different applications for 3D printing, casting, injection moulding and many more on our applications page.
What will an industrial CT scanner cost you? Of course, the price depends largely on your application, especially on the maximum size of the parts to be scanned. Among other things, the price is composed of:
To give you an approximate order of magnitude of what you can expect to pay for industrial CT equipment in Euros: The smallest systems begin at about 150,000€. These are suitable for scanning small plastic components, for example. A slightly larger system with higher resolution is around 250,000€ to 600,000€. Systems with higher energies, which are also suitable for larger components, range from about 450,000 to 800,000€. Fully automated systems that are customized to your application can cost around 500,000 to €1.5 million. The largest systems in the MeV range are between €1.5 million and €5 million.
Due to the complexity of the market and the many possible applications, it is advisable to talk to experts before making a purchase. In this way, you will find the ideal system for you that offers you a high ROI in the long term at a reasonable cost.
We offer you comprehensive guidance: from the initial consultation on possible applications of industrial CT to the creation of system specifications and a pre-selection based on your KPIs.
The landscape of industrial CT scanner manufacturers is wide-ranging. Depending on budget, application and further requirements, different manufacturers may be your best option.
In our database, we have created a list for you with manufacturers of equipment for industrial computed tomography. Simply click on the button below to get a list of CT equipment manufacturers. You may also filter by country/distribution area.
It is not always sensible to purchase your own CT scanner. For example, if you only want to have a single part scanned, or it does not make sense to integrate CT technology into your production process, external CT scanning service providers might be your best option. They will provide you with the scan results in the form of raw data for your own evaluation or will perform the evaluation on your behalf.
In our database you will find a comprehensive list of CT service providers. You can also filter the list by country.
We will be happy to advise you on your application, give you a cost estimate and show you which products are suitable for you. Just send us a short e-mail and we will get back to you as soon as possible.